Structure features: advanced end-face flow distribution design, smooth rotation at low speed. Advanced shaft seal design, can withstand high back pressure.

Advanced oil distribution mechanism design, with automatic wear compensation function. Double row tapered roller bearings are designed to withstand large radial forces, a variety of flanges, output shafts, and other mounting connections.

1, intermittent refers to the maximum inlet pressure, continuous working pressure refers to the working pressure difference 2, the motor should not work at the same time under the highest pressure and maximum speed.

3, the motor in intermittent working conditions, the running time should not exceed 10%.

4. The maximum working temperature is 8085 and the maximum allowable back pressure of the motor is 10MPa. However, it is recommended that the back pressure should not exceed SMPa

6. It is recommended to assemble below 40% of the maximum working pressure for 1 hour before the motor works at full load.

7, the recommended use of 68# anti-wear hydraulic oil, viscosity 37-73CST, cleanliness ISO18/13

1, try to keep the hydraulic oil clean. The reason for the decline in hydraulic oil quality lies behind the common faults of most hydraulic motors.

2, avoid the robot hydraulic motor in the system under the condition of load suddenly start or stop in the system under the condition of load suddenly start or stop the braking system will form the peak working pressure, pressure reducing valve can not reflect so fast, to maintain the hydraulic motor is not damaged.

3, speed ratio and working pressure can not exceed the required standard value.

4, often on the low speed motor inlet should have sufficient back pressure, capches hydraulic motor in the curve motor should be more so, or the roller may get rid of the inclined plane and collision, light cause noise, reduce the service life, heavy destroy the roller, let all the hydraulic motor damage. Most back pressure values are about 0.3 to 1MPa, and the higher its speed ratio, the higher the back pressure should be.

5, the application of grease with good safety coefficient of parts, lubricating oil number should be suitable for special system.