This series product winch structure type has the characteristics of compact, light weight, very light, beautiful and generous appearance design, and has the characteristics of good safety factor, high efficiency, large starting torque, good reliability of low speed, low noise, reliable practical operation, etc.. Application scope:

1. Rescue and road clearance;

2. Construction machinery; 3. Mining machinery; 4. Forestry division;

5. Oil industry

Abnormal noise and vibration often occur in the actual operation of hoist reducer. In use, we should always pay attention to the actual operation, and find that abnormal noise or vibration problems should be properly dealt with. The dispatch winch manufacturer below will give you detailed solutions to the abnormal noise and vibration of the reducer.

The factors of abnormal noise and vibration found in the operation of hoist reducer are: the road surface of gear meshing is too tight or too loose; The bearing room space is too large, the general gas is reduced when the sound is loud, and the sound is small when the light load is pushed; Reducer or bearing anchor bolts loose; Dirt falls into the reducer.

Lifting winch solution: change the gear meshing to the appropriate orientation. If the damage is serious, remove and replace the transmission gear; Repair or replace loose bearings; Pay attention to tighten loose screws; If all dirt falls into the reducer, the defect shall be terminated.