The basic principle of different braking modes is different, as follows:

1. Choose to use the speed control valve circuit brake: the circuit can complete double braking of the oil motor, and can have an adjustment effect. When the reversing valve responds to the middle position, the oil motor becomes a hydraulic oil pump under the action of inertia. The oil provided by the throttle valve on the high pressure side (for the pump) gives the speed regulating valve, and the relief valve limits the impact working pressure and makes the motor brake. The hydraulic oil pump can be self-priming from the fuel tank by the throttle valve on the low voltage side.

2. Braking with accumulator: the accumulator is placed at the inlet and outlet of the oil motor close to the oil motor, which can complete double braking of the oil motor. When the XWM8 series hydraulic motor reversing valve responds to the middle position, the oil riser of the original motor becomes high pressure because the motor turns into a pump. The accumulator on this side holds the oil discharged by the pump, and the accumulator on the other side of the XWM3 series hydraulic motor can provide oil supplement.

3 normally closed test brake brake: according to two hydraulic valve control valve control brake. Manual type directional valve in the left or right position, the working pressure oil through the hydraulic control valve directional valve into the brake hydraulic system, out of the torsion spring force to open the brake, so that the oil motor work. When the manual reversing valve is placed in the middle position, the gear oil in the brake cylinder is discharged back to the fuel tank by the hydraulic valve and the manual reversing valve to brake the motor.

4 normally closed test brake brake method two: XWM6 series hydraulic motor in the hydraulic pump oil outlet and brake hydraulic system between the one-way throttle valve. When the manual reversing valve is converted from the middle to the left or right, the working pressure oil needs to be entered into the brake cylinder through the section change valve, so the brake equipment is opened slowly to make the oil motor start stably. When braking is necessary, the manual reversing valve is placed in the middle position, and the oil in the brake cylinder is discharged back to the oil tank through the throttle valve, so rapid braking can be completed.