Cycloid hydraulic motor in long-term application or grasp some cleaning process, if everyone isn't very master in the matter, so we don't try so hard, because of the following, all the authority of experts to introduce the some cleanup process about cycloid hydraulic motor, hope everyone can serious reading article, if you have different suggestion, We warmly welcome you to call us and give us feedback. Let's take a look at this article.

To reduce the application of hydraulic motor pressure energy loss, first from the inside gradually, in reducing the internal structure of the system software pressure loss together to reduce the output power loss

One, cycloid hydraulic motor cleaning process:

1. Use an easy dry cleaning organic solvent to wash the tank of the machine, and then eliminate the organic solvent sediment by overthinking the gas.

2, clean up all the pipes of the motor, in some cases to carry out the predip of the pipes and interfaces.

3, in the pipeline installed oil filter, to maintain the valve provided by the oil pipeline and pressure pipeline.

4, in the collector with a cleaning plate to replace the high precision valve, such as electro-hydraulic servo valve.

5. Check whether all pipeline specifications are suitable and whether the connection is appropriate.

Two, how to reduce the cycloid hydraulic motor pressure energy loss:

1, to reduce the application of hydraulic motor pressure energy loss, first from the XSM5 series of hydraulic motor gradually, in reducing the internal structure of the system software pressure loss together to reduce the output power loss. To deal with this problem, components can improve the internal structure of the flow pressure loss, choose integration control circuit and casting sprue, at the same time also must reduce or remove the throttle loss of system software, as far as possible to reduce the security must overflow traffic, prevent selects the throttle valve system software to adjust the total flow and pressure.

2. In the use of raw materials, raw materials and new rubber seals made of negative pressure technology can be selected, so that friction loss can be reasonably reduced. When using the maintenance is not little, immediately maintenance hydraulic motor, avoid the pollution of the environment and causes serious damage on the motor service life and stability should be development trend of new way of pollution monitoring, pollution to the environment to carry out online measurement, to adjust immediately, do not allow the backward, to prevent lead to losses for disposal is not on time, hydraulic motor can reduce the pressure loss, Only when the manufacturer and the customer work together can the loss of pressure energy be avoided to a great extent.