Product overview

This type of hydraulic winch for crane winch, mainly used in truck crane, truck crane, drilling equipment, compact structure, economic benefits.

Hydraulic motor is one of the components of hydraulic transmission system, which is very important in the specific application. But in the installation process must pay attention to what matters needing attention? When the rotating shaft of the hydraulic motor is connected with other equipment, it should be guaranteed to be in the same boat or conveniently connected. The actual common problems are interpreted by hydraulic motor manufacturers:

1. Hydraulic motor rolling bearings can not be immediately installed on the machine tool spindle, such as the ability to bear the tangential force, or can not bear the tangential force of the motor belt disc.

2. Hydraulic motor chain controller from hydraulic motor manufacturer

Motor leakage pipeline should be unobstructed, generally do not accept back pressure type. If the leak line is too long or suffers from back pressure type due to some regulations, the dimension value shall not exceed the allowable low voltage sealing value. The outside oil can make the motor housing full of oil, shut down the casing of oil need to avoid injection into the fuel tank. To the two-speed hydraulic motor shutdown time long motor as an example, can not immediately overload operation, a certain period of time after the air combat to everything normal application.

3. Sound card frame with motor must have sufficient bending stiffness.

The support frame and bracket for mounting the motor need to be strong enough to absorb the recoil force of the motor's derived torque.

4. Hydraulic motor and gearbox should not be used together.